Why buy a terminal server when an old PC will do

My lab will require me to console into 4 switches. I don’t want to buy another router to be my terminal server, and I also don’t want to have to swap out console cables every 2 minutes.

Thankfully I don’t have to. Linux has a handy tool to turn a regular PC with a bunch of USB serial ports into a terminal server.

All you need is a bunch of USB ports (a USB hub will do), some rollover cables and a bunch of these which I found on ebay:

I bought 3 of the above, as the PC itself already has 1 serial port.

The app I’m going to use is called ser2net. Let’s install it

[email protected]:~$ sudo apt-get install ser2net

Now let’s see if Ubuntu 10.10 has reconised my USB serial cables:

[email protected]:~$ dmesg | grep tty
[    0.000000] console [tty0] enabled
[    0.932016] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.932314] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.625434] usb 6-1: ch341-uart converter now attached to ttyUSB0
[    6.649441] usb 6-3: ch341-uart converter now attached to ttyUSB1
[    6.672443] usb 3-2: ch341-uart converter now attached to ttyUSB2

Looks good so far. ttyS0 is my physical serial port and the ttyUSBx ports are the 3 USB-Serial cables. I’ll now configure ser2net to map TCP ports to my onboard port and my 3 USB ports.

[email protected]:~$ sudo vi /etc/ser2net.conf

At the bottom of that file you’ll see this:

2000:telnet:600:/dev/ttyS0:9600 8DATABITS NONE 1STOPBIT banner
2001:telnet:600:/dev/ttyS1:9600 8DATABITS NONE 1STOPBIT banner
3000:telnet:600:/dev/ttyS0:19200 8DATABITS NONE 1STOPBIT banner
3001:telnet:600:/dev/ttyS1:19200 8DATABITS NONE 1STOPBIT banner

Let’s change it to this:

2000:telnet:600:/dev/ttyS0:9600 8DATABITS NONE 1STOPBIT banner
2001:telnet:600:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT banner
2002:telnet:600:/dev/ttyUSB1:9600 8DATABITS NONE 1STOPBIT banner
2003:telnet:600:/dev/ttyUSB2:9600 8DATABITS NONE 1STOPBIT banner

save and quit, then restart ser2net:

[email protected]:~$ sudo /etc/init.d/ser2net restart
 * Restarting Serial port to network proxy ser2net                                                          [ OK ]

Now to test!

My dynamips box has an IP of If I want to get to the physical serial port from my laptop, I only need to do this:

C:\Users\Darren>telnet 2000
ser2net port 2000 device /dev/ttyS0 [9600 N81] (Debian GNU/Linux)


What about a USB cable?

C:\Users\Darren>telnet 2003
ser2net port 2003 device /dev/ttyUSB2 [9600 N81] (Debian GNU/Linux)


I use a tabbed telnet/SSH app called ZOC. From there I can specify the telnet ports and which switch they map to. I can now console into all of them without the need of a terminal server. The actual USB-Serial cables only cost me £2 each, and you can have loads of them.

(2011/02/19) EDIT: Dariush below mentioned that you can get multiple serial adaptors through a single USB port. This is an example: http://www.amazon.co.uk/NEWLink-Serial-Quad-Cable-Adaptor/dp/B003DA5TG4

If you don’t want to go the USB hub root, this could certainly work. Serial cables aren’t exactly high bandwidth. I’ve even found an 8 port model here, but no price: http://www.delock.com/produkte/gruppen/USB+Adapter/Delock_Adapter_USB_8x_Serial_61519.html

© 2009-2020 Darren O'Connor All Rights Reserved -- Copyright notice by Blog Copyright