My last post about Traceroute over here: http://mellowd.co.uk/ccie/?p=609 – got some interesting conversation going on in the comments.
Basically there is quite a big difference in the way in which Windows and Linux handle traceroute. I tested on both Windows 7 and Ubuntu 10.04, but my guess is that all Windows follow the same format as do all *nix’s (please let me know if otherwise though!)
I would recommend reading the above post again quickly to get all the basics out the way before we delve into the differences.
Step-wise, this is what happens on Windows:
- The OS send a DNS PTR request to 220.127.116.11.in-addr.arpa to get the hostname for 18.104.22.168
- I get a DNS PTR response giving me a hostname
- The OS send an ICMP ECHO request with a TTL of 1
- I get an ICMP TTL Exceeded packet back from my local router
- 3 & 4 above happens twice more
- The OS send a DNS PTR request to my local router
- My local router responds with it’s hostname
- The cycle above (3-7) is then repeated with a TTL of 2, then 3 and so on
- We finally get to 22.214.171.124 – which sends back an ICMP ECHO reply – Once I get 3 the job is complete.
Ubuntu does this completely differently though. Step-wise this is what’s going on:
- The OS immidiately sent 3 UDP packets with a high port number straight to 126.96.36.199 with a TTL of 1
- The local router responded with 3X ICMP TTL Exceeded message
- The above (1 & 2) is then repeated until we get to 188.8.131.52
- 184.108.40.206 does not generate a ICMP ECHO reply as an ECHO request was not sent. Rather we get 3 ICMP Code 3 (Port unreachable) replies
- The OS now throws out 7 DNS PTR request specifically to each IP it determined in the path from above (Including 220.127.116.11 iself!)
- As soon as all the replies come, the job is complete.
The main differences are that Windows will send a DNS PTR request from the start, then send ICMP ECHO requests. At each hop it’ll send a DNS PTR request and then move onto the next hop.
Linux starts with sending UDP packets to a high port number straight away. When it finally gets to the last hop it’ll then send out a mass DNS PTR request to every hop in the path that it has determined.