Google Engineer. Dual CCIE #38070. JNCIE-SP #2227
This has taken me absolutely hours to finally finish. I wanted to create a topology that I’ll be able to run all kind of different labs on. i.e. the topology is extremely complex. I’ve configured all the connections through my .net file as well as saving base configs (hostname and IP addresses) so I don’t…
Now tht I’ve got my basic configuration up, we now need to set idlepc values for dynamips. If you load up even just 1 router without doing this, you’ll end up with 100% CPU usage. As an added bonus I’ve measured power draw from the wall just to see exactly how much power this set…
So I’ve got everything almost as I want it. Dynamips is running fine and I’m using SecureCRT to log into all my routers. I normally use Putty but it isn’t a tabbed application, so SecureCRT fits the bill. I’m going to share my configuration here, but please be aware that you’ll need to change certain things to…
The BSCI doesn’t go too much into IPv6 and OSPFv3 but this will eventually become more and more common in future. This lab is actually a very simple one. OSPFv3 and IPv6 lab1: Set up the adjacencies using only IPv6 The only IPv4 addresses to be used are the loopback addresses Create IPv6 loopbacks on…
Now that my server is up running with it’s wireless card just fine, it’s time to begin configuring dynamips/dynagen. The first thing you’ll need is a few IOS images. Of course I cannot provide this for you, you’ll have to get it yourself. You can put your IOS images wherever you want, but I’ve put…
© 2009-2020 Darren O'Connor All Rights Reserved -- Copyright notice by Blog Copyright